Broadcom Brocade G720 Скачать руководство пользователя страница 68 | Manualshive

Страница: 68 / 86

background image

G720-Install-IG101 Installation Guide

Brocade

®

G720 Switch Hardware Installation Guide

The new power supply and fan assembly must have the same part number and airflow label (or lack thereof) as the power

supply and fan assembly already installed.
1. To leave the device in service while installing a power supply and fan assembly, verify that the other power supply and

fan assembly (the one already installed) has been powered on for at least four seconds and has a steady green LED.

2. Using a Phillips screwdriver, unscrew the captive screw of the filler panel that is located in the empty power supply and

fan assembly slot.

3. Orient the new power supply and fan assembly with the captive screw on the right, as shown in the following figure.

Do not force the installation. If the power supply and fan assembly does not slide in easily, ensure that it is correctly

oriented before continuing.

CAUTION

Carefully follow the mechanical guides on each side of the power supply slot and make sure the power

supply is properly inserted in the guides. Never insert the power supply upside down.

Figure 30: Inserting an AC Power Supply and Fan Assembly

1. Device

2. AC Power Supply and Fan Assembly

3. Captive Screw

4. Gently push the power supply and fan assembly into the chassis until it is firmly seated.
5. Using the Phillips screwdriver, secure the power supply and fan assembly to the chassis by tightening the captive

screw.

6. Plug the power cord into the power supply and fan assembly and power on the unit by flipping the PSU power switch

to the on position (the “I” symbol).

7. Verify that the LED on the new power supply and fan assembly displays a steady green light while the device is

operating.
If the LED is not a steady green, ensure that the power supply is securely installed and seated properly.

8. Optional: Enter

psshow

to display the PSU status.

The power supply and fan assembly status can also be viewed using Web Tools.

G720-Install-IG101

68

Broadcom

«
...
66
67
68
69
70
...
»

Содержание Brocade G720























































































Отзывы:

Нет отзывов

Похожие инструкции для Brocade G720

Бренд: Barksdale Страницы: 5

SUPERSTACK 3 3226

Бренд: 3Com Страницы: 5

Бренд: 3Com Страницы: 139

CoreBuilder 7000

Бренд: 3Com Страницы: 150

CoreBuilder 7000

Бренд: 3Com Страницы: 264

Бренд: 3Com Страницы: 574

Бренд: 3Com Страницы: 333

SUPERSTACK 3 3226

Бренд: 3Com Страницы: 70

OfficeConnect 3C16790C

Бренд: 3Com Страницы: 18

Бренд: 3Com Страницы: 1314

SuperStack II Switch 1100

Бренд: 3Com Страницы: 62

Бренд: GarrettCom Страницы: 24

Бренд: Panio Страницы: 5

Бренд: DeLOCK Страницы: 8

MMAC-Plus 9T125-24

Бренд: Cabletron Systems Страницы: 36

Бренд: Uniclass Страницы: 32

Бренд: Lakeshore Страницы: 82

Бренд: Planet Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды