Overview
Introduction
IMMAGE 800 Operations Manual A11403
Sample Programming
September 2016
Page 7-45
7
Programming a Batch of Samples
Overview
Introduction
Multiple samples can be programmed as a batch with the same chemistries, Sample
Type, Sample Comment, and Sample Options.
Up to 100 samples can be programmed in a batch. A maximum of 72 samples can be
placed on the sample carousel at one time. Additional samples in a batch can be
placed on a subsequent run.
Batches and individual samples can be programmed in the same run.
Entering/Editing a Batch Sample Program
Introduction
The information to be applied to all samples in a batch is entered in the Program
Sample screen. This information can be edited later for individual samples within the
batch.
Entering a Batch Program
Follow the steps below to enter a sample program to be applied to a batch of samples.
Step
Action
1
Select
Samples
from the menu bar.
2
Select chemistries from the Program Sample screen.
(Refer to Programming a Sample, Selecting Chemistry Tests by Panel and
Selecting Chemistry Tests by Chemistry, in this chapter for more
information.)
3
Select Sample Type if the Sample Type default is to be changed for the
batch.
(Refer to Programming a Sample, Selecting a Sample Type, in this chapter
for more information.)
4
Select Sample Comment if a Sample Comment is to be entered for the
batch.
(Refer to Programming a Sample, Entering a Sample Comment, in this
chapter for more information.)
5
Select
Sample Options [F3]
if replicate, AGXS testing, or dilution
defaults are to be changed for the batch.
(Refer to Programming a Sample, Selecting Sample Options, in this
chapter for more information.)
