Avtodizel ???-238??, Руководство по эксплуатации

Страница: 195 / 254

195
Fig. 96. Water pump:
1–housing; 2–impeller; 3–gland seal; 4–bushing; 5–shaft; 6–water-
rejector; 7–plug; 8–inlet pipe; 9–circlip; 10–pulley; 11, 12–sealing
rings; 13–ball bearings; 14, 15–fastening nuts and washers.
8 Unscrew the plug 7 from threaded hole of the impeller 2.
9 Screw in threaded hole (
М
22
х
1.5) of the impeller 2 the nut
17 of a remover tool 16 (fig. 97, 98) and screwing in the bolt
18, remove the impeller 2 from the shaft 5.
10 Unbend the lock tabs of the gland seal body 19 (fig. 97) and
take out the seal 22 complete with the spring and frames.
11 Using remover tool 16, remove the pulley 10.