Avid Technology MC Pro, Руководство по эксплуатации

Страница: 97 / 156

Media Application Controller Operation Guide DAW Integration
100
are also selectable sources for the Control Room output.
• Headphone (1)
- The headphone output is a dedicated stereo downmix for the
control room headphones.
• Monitor (4) - Create up to four speaker outputs (all formats up to 8.1) con-
trolled by the Main Spkrs/Alt 1 Spkrs/Alt 2 Spkrs buttons on the MC surface.
5. Click on a bus to create.
A dialog appears to name the bus and select its format (up to 8.1 depending on the
bus). When finished, it appears in the Studio tab.
6. Click Not Connected in the Audio Devices column of the bus name just created.
Select the hardware driver to use with that bus from the popup menu (your ASIO
soundcard).
7.
Click the + button next to the bus name.
The display expands to show the input or output channels that are part of that bus.
After selecting the hardware, Nuendo automatically assigns each output or input
to the first available hardware port (i.e., MADI 1, MADI 2). To reassign these,
click in each channel’s Device Port column and select the proper port from the
pop-up menu. For example, if Monitor 1 is a 5.1-channel system and should go
to outputs 20–25, click on each output (L, C, R, LFE, LS, RS) and assign them to
ports 20–25.
8. When using Nuendo’s Control Room Mixer, you may want to lock the MC Moni-
tor section to retain Monitor control when Nuendo is not the application in focus.
To do so, press and hold the MC keyboard’s
Shift
Key and press the MC Monitors
section’s Setup button.
Control Room
The MC’s Control Room section switches the output between Nuendo’s Monitor busses
(output busses going to speakers). The MC’s
Main Spkrs/Alt 1 Spkrs/Alt 2 Spkrs
but-
tons switch the output between the first three monitor busses created. The fourth Monitor
bus is accessed by opening the Control Room window in Nuendo ( Devices > Control
Room ) and clicking the D button (bottom-right).
The Dim key lowers the volume to the selected Monitor bus by the specified Dim level
(default = –30 dB). The Dim level can be adjusted by turning the Control Room knob
while DIM is selected.
The Cut key cuts the output to the selected Monitor bus.
The Soft Knob controls the level of the selected Monitor bus. When the knob is touched
or adjusted the level appears in the LCD display to the right of the knob.