Avid Technology MC Pro, Руководство по эксплуатации

Страница: 21 / 156

Media Application Controller Operation Guide Installation and Configuration
12
• Enable Discovery Network Wide Logging : Toggle this setting on for debugging
only.
• Display Discovery Database
: Opens list of all EuCon clients on the network.
• Quit : Shuts down the MC Client service.
2.3.3 IP Addressing
MC
The Netgear RP614 router included with the standalone MC takes care of all IP ad-
dressing, using its internal DHCP server to distribute IP addresses to the MC and your
workstation(s). Make sure the router is powered on and connected (with Ethernet cables)
to your MC and workstation(s) for the DHCP server to correctly assign IP addresses.
The WAN port on the Netgear can be connected to a studio LAN, or to an Internet con-
nection, depending on your studio setup. Note that the MC and workstation(s) must be
on the same network subnet for the MC to connect to your workstation(s) properly (con-
necting them all to the LAN ports on the Netgear automatically does this).
System 5-MC
The CM408T modules do not allow static IP addressing. Use a DHCP server to autoas-
sign their IP addresses. The SonicWALL PRO 1260 router included in the System 5-MC
system is set to perform this function by default.
To set up the System 5-MC network, connect the MC and CM408T modules to the Son-
icWALL 1260. The SonicWALL 1260 auto-assigns their IP addresses. The MC can now
recognize the CM408T modules. See 2.3.7 Modules (System 5-MC Only) to configure
the MC to control the CM408T modules.
Euphonix ships the SonicWALL 1260 with all default settings unchanged. To log into the
SonicWALL:
Username: admin Password: euphonix
The SonicWALL 1260 checks
for a DHCP server on the LAN to which it is attached. If a DHCP server is not found, it
enables its own internal DHCP server.
To access the SonicWALL’s web configuration interface:
1. Connect a workstation to one of the 1260’s LAN ports.
2.
Set the workstation to obtain an IP address automatically using DHCP.
3. Open a web browser and type 192.168.168.168 (the router’s default IP address)
into the location address field.
4.
Log in to the SonicWALL:
Username: admin Password: euphonix
The SonicWALL Setup Wizard then launches to configure the router settings.