Avid Technology MC Pro, Руководство по эксплуатации

Страница: 123 / 156

Media Application Controller Operation Guide DAW Integration
126
EQ
The EQ knobset is the same as DYN but for EQ plug-ins. It is also important to note that
EQ knobset is simply a special case mapping of parameters from the INSERT knobset.
This is dedicated to provide control of Digidesign EQ plug-ins in a way that is consistant
with other EuCon enabled DAW systems.
The special mapping the EQ plug-in parameters allow the operator to make use of all 8
knob cells for EQ editing:
• Each band of EQ uses 2 knob cells. one each for GAIN and FREQ. To access Q
(or bandwidth), press the SEL button on the FREQ knob cell. This means you have
access to 4 fully parametric bands of EQ at one time. This method of displaying
EQ parameters is derived from the Euphonix flagship console, System 5:
• Bands are mapped from Hi to Low starting with knob cell 1. This means Low
bands are at the bottom and High Bands are at the top of the channel strip.
• The orientation of the knob cells on the MC Mix means that low bands are to the
right while high bands are to the left. This will be reversed in future software ver-
sions to provide left-to-right control that matches standard frequency graphs of EQ
plug-ins.
• For EQ plug-ins with more than 4 bands, the PAGE buttons allow for scrolling to
additional bands.
Example, for 7 band EQ:
• pg1 shows LF, LMF, HMF & HF
• pg2 shows HPF, LPF & MF
• LPF/HPF filter slope is toggled by pressing SEL on FREQ knob
• LPF/HPF filter type is toggled by pressing ON button on FREQ knob
AUX (send)
The AUX (send) knobset displays SND level. This knobset provides access to Sends
A-E in Pro Tools for all channels.
• pressing SEL toggles through SND A-E
• ON button toggles Pre/Post
• currently No Assign Mode implemented. This can only be accessed via Soft Keys.