Avid Technology MC Pro Скачать руководство пользователя страница 53

Страница: 53 / 156

Media Application Controller Operation Guide

Soft Keys

5.2.5 Cut, Copy & Paste Soft Keys

It is possible to Cut, Copy and Paste SoftKeys when editing an application set using the

MC keyboard.

• Press the section Setup button and select the SoftKey you wish to cut, copy or

paste to.

• Use the following keyboard commands to perform the desired function:

Cut: Ctrl + Shift + X

Copy: Ctrl + Shift + C

Paste: Ctrl + Shift + V

5.2.6 Locking

The Locking tab allows locking any or all of the Soft Key sections to a EuCon applica-

tion, retaining their commands while the MC is switched to another application or work-

station. The channel strips (or joystick panners) can also be locked in this manner. This

functionality is used to retain control of one application or DAW while using another.

For example:

• Locking the Left Edit section to the Nuendo transport controls while working in

Pyramix.

• Using one DAW for playback and another for editing/recording so there is no need

to switch back and forth between workstations in order to control both DAWs.

• Controlling different applications on the same workstation, such as Pro Tools with

the Left Edit section and Logic Pro with the Right Edit section, all while editing

video in Final Cut Pro.

Содержание MC Pro





























































































































































Результаты поиска

Содержание MC Pro

Отзывы:

Avid Technology MC Pro, Руководство по эксплуатации, Страница: 53 / 156

Результаты поиска

Содержание MC Pro

Отзывы: