Avid Technology MC Pro Скачать руководство пользователя страница 121

Страница: 121 / 156

Media Application Controller Operation Guide

DAW Integration

124

Accessing Knobsets

CM408T:

The 8 knobsets are accessed directly from each channel strip.

• INSERT, GRP, EQ and DYN knobsets provide access to the DSP

Edit / Assign controls of the corresponding channel using the 8 knob

cells of that strip.

• Pan, Aux, Input and Mix are global. These knobsets will toggle the

display on all channels on the surface. Additionally, these knobsets

us eonly the bottom knob cell (8).

• The default knobset is PAN

MC Soft Knobs:

The 8 soft-knobs on the MC Pro can

also beused to access the 8 knobsets. By default, this

section will display parameters specific to the atten-

tioned track. The default knobset is always PAN.

To access other knobsets press BACK. The 8 LCD dis-

plays will now show the 8 knobsets. Press the corre-

sponding LCD button or knob-top to enter the desired

knobset.

INSERT ( * )

The INSERT knobset will display the inserts instantiated on the attentioned channel. The

INSERTS will be displayed on knob cells 5-8. The MC Mix will default to CHAN mode;

INSERTS will display on 4 right most knob cells. To edit the parameters of a plug-in,

press its corresponding knob-top.

Press the PAGE RIGHT button to see insert #5. Press PAGE LEFT to return to #1-4.

Содержание MC Pro





























































































































































Результаты поиска

Содержание MC Pro

Отзывы:

Avid Technology MC Pro, Руководство по эксплуатации, Страница: 121 / 156

Результаты поиска

Содержание MC Pro

Отзывы: