manualshive.com logo in svg

Avid Technology MC Pro, Руководство по эксплуатации, Страница: 10 / 156

Поделиться
Скачать
Avid Technology MC Pro Скачать руководство пользователя страница 10

1

 Media Application Controller Operation Guide

Chapter 1: Introduction

The 

MC Media Application Controller

 is a standalone surface designed to control digital 

audio workstations. The System 5-MC is an audio recording, editing, and mixing sys-

tem that integrates the MC with the System 5 CM408T channel strip modules. Multiple 

CM408T modules, each with eight channel strips, can be integrated to control an unlim-

ited number of audio channels simultaneously.

The MC found in the System 5-MC has exactly the same powerful control features found 

in the standalone version but is also able to manage channel strip assignments, layouts, 

and strip functions. The System 5-MC is fitted with a pair of joystick panners in place of 

the MC’s four faders (joystick panners can also be ordered in the standalone version).

With a myriad of customized controls (keyboard, trackballs, Touchscreen, Soft Keys, 

faders and knobs), the MC speeds operation, enhances creativity, and integrates the tasks 

of mixing and recording. The system also includes Studio Monitor Express (SME), a so-

phisticated monitoring application created by Euphonix. SME provides surround moni-

toring with multiple speaker controls and is selected from the MC’s Touchscreen.

The MC and workstation are connected via Ethernet, sending mouse, keyboard, and Eu-

Con commands to the workstation computer (PC or Mac). The MC integrates the control 

surface with the workstation and allows open connectivity, integration with third-party 

plug-ins, virtual instruments, video solutions, and I/O hardware. The MC is modular, 

expandable, flexible, and cost-effective.

Содержание MC Pro





























































































































































Отзывы:

Нет отзывов