manualshive.com logo in svg

Avid Technology MC Pro, Руководство по эксплуатации, Страница: 11 / 156

Поделиться
Скачать
Avid Technology MC Pro Скачать руководство пользователя страница 11

Media Application Controller Operation Guide 

Introduction

2

1.1  Multiple Levels of Control

The MC uses five levels of control:

•  Keyboard and trackball
•  Programmable key commands via the Soft Keys
•  HUI command protocol to control Pro Tools 8.x and lower
•  Mackie Control Universal protocol for DAWs/media software that support it (such 

as RME HDSP Mixer and Sony Vegas)

•  EuCon control of EuCon-aware applications (Pro Tools 9, Nuendo, Logic Pro, and 

Pyramix)

1.1.1  Level 1: Keyboard and Trackball

The MC accesses your applications using its full-sized keyboard and two trackballs. 

Each trackball has a control ring and four user-programmable switches, allowing both 

left- and right-handed operation. One or both trackballs can be swapped out for a jog/

shuttle wheel, and the MC can be set to interpret the physical left and right edit controllers 

as 

left

 or 

right

, depending on the operator’s needs. For example, in large dual-operator 

System 5-MC setups with two MCs, the left-side operator can use the right-side MC’s 

left trackball as the

 right

 trackball or jog wheel. The trackball rings can also be used for 

Wheel Edit Mode functions, like zooming, trimming, nudging and moving clips. 

1.1.2  Level 2: Soft Keys

The MC uses Soft Keys with integrated LCDs to display switch functions and icons.  

The Soft Keys can be programmed to send complex macros and simple keystroke com-

mands and are named so their function is obvious. Any function can be assigned to each 

Soft Key to suit the user’s working style.

The Soft Key mappings are saved to 

Application Sets

, which automatically change as 

each application is activated. Default Application Sets are supplied for a number of pro-

grams but these can be modified and saved. Soft Keys can be 

locked

 to a specific appli-

cation, which maintains control even when it is not the workstation’s current application 

(the term in 

focus

 is used for the current or front application). The Soft Key displays can 

show any character set.

1.1.3  Level 3: HUI

The MC supports the HUI (Human User Interface) command protocol for control of  

Pro Tools version 8 and lower (Pro Tools 9 is a EuCon-aware applciation). HUI map-

pings are saved with Application Sets for instant recall when each application becomes 

active.

Содержание MC Pro





























































































































































Отзывы:

Нет отзывов