Avid Technology MC Pro Скачать руководство пользователя страница 59

Страница: 59 / 156

Media Application Controller Operation Guide

Soft Knob

In addition, the top of the module has:

• Page Left

and

Right

keys: access additional Soft Knobs pages in the knobset

• Left

and

Right

selector keys: not yet implemented

• Back

key: moves one menu hierarchy up.

6.1.1 Knobsets

Each DAW channel function (Aux Send, Inserts, EQ, Pan, etc.) has a knobset associated

with it, and the EuCon software includes knobsets for all supported plugins. A knobset

is comprised of pages of eight parameters each. The MC and CM408T’s knobsets are

identical.

Touch-sensitive Knobs

The knobs are touch-sensitive so the system can detect when the knob is touched, moved,

and released. Touching a knob displays the current parameter’s value on the Soft Key’s

LCD instead of the parameter name. Releasing a knob reverts the display back to the

parameter name.

Содержание MC Pro





























































































































































Результаты поиска

Содержание MC Pro

Отзывы:

Avid Technology MC Pro, Руководство по эксплуатации, Страница: 59 / 156

Результаты поиска

Содержание MC Pro

Отзывы: