Avid Technology MC Pro Скачать руководство пользователя страница 57

Страница: 57 / 156

Media Application Controller Operation Guide

Chapter 6: Soft Knobs

The MC has nine touch-sensitive knobs with LED display rings to control many pa-

rameters. These can also send out HUI data but are more effective when used with

EuConaware applications in which they can intelligently access functions such as EQ,

dynamics, aux sends, or plug-ins.

Left and right keys are available to page within a knobset. The eight knobs operate on

one channel/track within the selected knobset. On the MC, the Soft Key LCD displays

show the knob function and when touched, the knob value. Switches are available for

automation and other knob-related functions.

The Assignable Knob (the bottom-left knob in the Soft Knobs section) can be dynami-

cally assigned to most knob or switch functions in Nuendo and Logic Pro. For example,

moving the pointer over a track panner in Nuendo, assigns pan to the MC’s Assignable

Knob. With Logic Pro, clicking on a track panner, assigns that function to the MC’s As-

signable Knob. The Assignable Knob can be locked to a particular function by pressing

the Assignable Knob’s top.

6.1 Knob Cells

The Soft Knobs area is like a Super Channel or Track Inspector to edit a single track. A

channel can be

attentioned

to the Soft Knobs area for editing, which is different from

se-

lecting

it. A DAW can

select

more than one track at once.

Attentioning

(sometimes called

focusing

) is meaningful only for the control surface and is done one track at a time.

Содержание MC Pro





























































































































































Результаты поиска

Содержание MC Pro

Отзывы:

Avid Technology MC Pro, Руководство по эксплуатации, Страница: 57 / 156

Результаты поиска

Содержание MC Pro

Отзывы: