Avid Technology MC Pro Скачать руководство пользователя страница 17

Страница: 17 / 156

Media Application Controller Operation Guide

Installation and Configuration

• VST plugin layouts for Nuendo

: This option installs .xml files that map parame-

ters of Nuendo’s VST plugins to the MC’s Soft Knobs and to the CM408T’s knobs.

• EuCon adapter for Pyramix

: Pyramix users must install this component to en-

able EuCon control of Pyramix.

• Euphonix Studio Monitor Pro 2 (SMP2):

This PC-based professional monitor-

ing application provides all the functionality of SME with additional multi-chan-

nel functionality for up to 7.1 monitoring. This application also adds assignable

Monitor Inserts and multiple talkback configurations and more. This application

requires iLok authorization to run.

NOTE: Windows 7 users should disable User Account Control (UAC).

Go to: Control Panel > User Accounts > Turn User Account Control On or Off

Figure 2-2

Windows Vista User Account Control Preference

2.2.3 Upgrading the EuConMC Software

To upgrade the EuConMC software on the MC:

Download the latest version of the EuConMC software from:

http://www.avid.com/proseriessupport

NOTE: The EuConMC and the EuConWS software must have the same version and

build or they may not communicate properly. Check the EuConWS version

installed on your workstation(s). Download the current version and install it

on all workstations used with the MC if the version/build does not match the

EuConMC software you just downloaded.

Copy the installation executable you downloaded onto a removable USB drive.

On the MC, touch Euphonix Menu > Shutdown, then touch Exit To Operating

System.

This quits the MCApp software.

4. On the MC, click Start > Programs > EuCon > Uninstall.

Содержание MC Pro





























































































































































Результаты поиска

Содержание MC Pro

Отзывы:

Avid Technology MC Pro, Руководство по эксплуатации, Страница: 17 / 156

Результаты поиска

Содержание MC Pro

Отзывы: