manualshive.com logo in svg

Avid Technology MC Pro, Руководство по эксплуатации, Страница: 124 / 156

Поделиться
Скачать
Avid Technology MC Pro Скачать руководство пользователя страница 124

Media Application Controller Operation Guide 

DAW Integration

127

PAN (default knobset)

The PAN knobset shows the channel strip panner. PAN knobset defaults to NORMAL 

mode. 

•  press SEL to toggle Pan R/L on stereo channels

MIX

The MIX knobset displays the currently assigned O/P’s. 

Assigning O/P:

•  turn knob until desired O/P is displayed
•  press blinking ON button to assign

Mirrored, All and/or Cascade O/P’s:

•  To assign multiple O/Ps from the same channel, hold CNTRL when you assign
•  To assign O/P on ALL channels, Hold OPT and assign
•  To assign O/P on all selected, hold OPT+SHFT and assign
•  To cascade O/P assignments, add CMND modifier to any above.

GRP (group)

The GRP knobset may seem basic at first glance. The GRP knobset displays the param-

eters of selected plug-ins. The knobs are mapped in the same way as the HUI DSP Edit 

/ Assign section, including a “scroll” knob. These are mapped to knob cells 1-5 as op-

posed to INSERT knobset, which maps the controls on 3-8 for easy reach on the 408T 

modules.

The GRP knobset also displays the PAN, INPUT, MIX and AUX control on knob cell 8.

The top level of the GRP knobset displays the plug-ins on selected channel. To edit a 

plug-in, press the corresponding knob-top.

What makes the GRP knobset special? It allows the operator to edit parameters of ANY 

plug-in in the entire session regardless of channel or HUI bank. Any plug-in opened 

from the Pro Tools GUI will be displayed in the GRP knobset. This includes plug-ins 

that are not on any HUI bank.

Note:   Similar functionality is possible using the INSERT knobset. 

Содержание MC Pro





























































































































































Отзывы:

Нет отзывов