Avid Technology MC Pro Скачать руководство пользователя страница 18

Страница: 18 / 156

Media Application Controller Operation Guide

Installation and Configuration

The EuCon Uninstaller removes the EuConMC software.

NOTE: User sets are not deleted during the uninstall procedure. However, updated

user sets are installed while upgrading the EuCon software. To ensure these

are installed in the default location, backup C:\Program Files\Euphonix\Eu-

Con\User Sets to removable media, then delete the

Usersets folder. The new

user sets are NOT installed if the current ones are not first removed.

Restart the MC at this time.

Insert the removable USB drive into the MC’s USB port.

The drive appears in My Computer on the MC desktop.

Double-click the drive to display its contents.

Double-click the

EuConMC

executable file.

The installer program launches. Install the software to the default location

(C:\Program Files\Euphonix\EuCon)

The MC presents a list of three options to install:

• MCApp, EuCon runtime

, etc. - This is the main MC software application. It is

grayed out since it must be installed for the MC to function properly.

• MC PC104 Driver, hardware support, firmware

- This installs the actual hard-

ware driver the EuConMC uses to control the MC surface. DO NOT UNCHECK

THIS OR YOUR MC WILL NOT FUNCTION.

• CM408T So Update Server

- This installs the Firmware Updates server,

which updates the CM408T module firmware. See 2.2.4

Firmware Update Server

(System 5-MC only)

Cllick Next in the remaining dialogs in the Install Wizard.

10.

Reboot the MC when the Wizard finishes.

2.2.4 Firmware Update Server (System 5-MC only)

CM408T So Update Server

is checked, the Firmware Update Server launch-

es after the EuConMC installation completes. The CM408T modules will then prompt

to be updated. If they do not, reboot them and they will connect to the Firmware Up-

date Server. Press the

key on each CM408T after the update prompt appears. Each

CM408T will apply the update, automatically reboot, and be ready to operate. After all

CM408T modules are updated, quit the Update Server.

Содержание MC Pro





























































































































































Результаты поиска

Содержание MC Pro

Отзывы:

Avid Technology MC Pro, Руководство по эксплуатации, Страница: 18 / 156

Результаты поиска

Содержание MC Pro

Отзывы: