Avid Technology MC Pro Скачать руководство пользователя страница 19

Страница: 19 / 156

Media Application Controller Operation Guide

Installation and Configuration

2.3 Configuration

2.3.1 MC Client Software Configuration

General

Installing MC Client is discussed in the

Installation Guides

. Once installed, MC Cli-

ent does not need further configuration for applications. It automatically detects if an

application is EuCon-aware and enables EuCon communication. If not, it enables the

MC’s keyboard, trackball, and Soft Keys to control your application as if the MC were

a peripheral directly plugged into your workstation. Since MC Client runs at the operat-

ing system level, it can control all non-EuCon-aware applications just as your regular

keyboard/mouse combo can (with the useful addition of Soft Key macros).

Configuring HUI/Mackie Control Protocol

Since HUI and Mackie Control Universal use MIDI to communicate, they require al-

location of MIDI ports by the operating system. The EuCon software creates a virtual

MIDI driver with up to 32 ports, but actual communication with the MC occurs via the

faster and more reliable Ethernet network. HUI and Mackie Control use up to 4 MIDI

ports per application. Ports are allocated by the user using the EuPrefs (OSX) or the

Euphonix Control Panel (Win).

• OSX:

To configure applications with HUI/Mackie control in OSX, drag your de-

sired applications into the

EuPrefs Pane

(

Apple Menu > Sytem Preferences >

EuPrefs)

and select the Protocol and MIDI ports to be used.

Figure 2-3

Euphonix Preferences pane

Содержание MC Pro





























































































































































Результаты поиска

Содержание MC Pro

Отзывы:

Avid Technology MC Pro, Руководство по эксплуатации, Страница: 19 / 156

Результаты поиска

Содержание MC Pro

Отзывы: