Avid Technology MC Pro, Руководство по эксплуатации

Страница: 112 / 156

Media Application Controller Operation Guide DAW Integration
115
4. Type Main Spkrs (use exact capitalization and spacing).
5. Repeat Steps 3 and 4 for Alt 1 Spkrs and Alt 2 Spkrs .
6.
Create the appropriate patches for the new speaker sets (consult the Pyramix man-
ual for specific information).
The MC can now switch between those speaker sets using the
Main Spkrs
,
Alt 1 Spkrs
,
and Alt 2 Spkrs Control Room section buttons on the MC surface. The Dim and Cut
controls also function as expected on the selected speaker set. The Soft Knob controls
the level of the currently selected speaker set.
11.4.4 Talkback
Follow these steps to use the MC Talkback button with the MC and Pyramix:
1. Create a channel in your Pyramix project and name it Talkback .
Use this exact capitalization and spelling
.
2. Close and re-open your project.
This causes Pyramix to rebuild its mixer.
Holding down the MC’s Talkback button unmutes the channel named Talkback.
We recommend routing the MC’s talkback mic output into your Pyramix system’s physi-
cal inputs. This enables sending the talkback to headphone feeds, remote studios, etc.
via aux sends.
11.4.5 Plugin Integration
The MC can control Pyramix plugins using the Soft Knobs (or the CM408T knobsets for
System 5-MC). Euphonix supports most Pyramix plugins and continues to add others.
Pyramix plugins cannot be instantiated from the surface at this time; however plugin
parameters can be edited and automated from the touch-sensitive Soft Knobs.
To edit an instantiated Pyramix plugin:
1. Select the desired channel either from the Tracks Touchscreen, or on an MC or
CM408t strip
2. Press the Inserts Soft Knob key on the MC or knobset key on CM408T.
The Soft Knobs (or knobset on the CM408T) change to reflect the plugins avail-
able for editing.
3. Press the Soft Knob top or the related Soft Key to edit the plugin.
See Section 6.1 -
Knob Cells
for instructions on editing parameters using the Soft
Knobs.