Avid Technology MC Pro, Руководство по эксплуатации, Страница: 40 / 156

Media Application Controller Operation Guide MC Preference Settings
31
The Network pane in the MC preferences section allows you to custom define the ad-
dressing used for multicasting data used by the EuCon system.
Most systems will never need to use this feature, however special care should be taken
if it determined that custom network settings are to be used. Please advise with your
IT department to ensure proper addressing and port settings are used for your place of
operation.
4.4.1 To set custom multicasting settings:
• Connect to all the workstations and modules you want to change settings for.
• Only workstations assigned to the 4 workstation switches will be affected by this
change.
• Only CM408T modules “Assigned to this MC” will be affected by this change
• Go to Euphonix menu > Prefs > Network tab.
• Press the “Use Custom Settings” button (off by default).
• Make changes to your settings:
NOTE: Generally, users will want to choose address from the following ranges based
on direction from their IT department (which they are responsible for allocat-
ing per subnet and site). (Information taken from Stevens, Section 21.2 (pg
553), figure 21.3):
Link-local 224.0.0.0 to 224.0.0.255
Site-local 239.255.0.0 to 239.255.255.255
• Go to the Setup > Modules page on the MC and “remove” all the attached
CM408T modules.
• Restart all CM408T modules by pressing the RESET button located on the bottom
front of the units.
• Restart the MC:
• Go to: Euphonix Menu > Shutdown
• Press Restart
• Log out of all your workstations and log back in.
• You may need a separate keyboard and mouse to do this since EuCon connectivity