Avid Technology MC Pro Скачать руководство пользователя страница 109

Страница: 109 / 156

Media Application Controller Operation Guide

DAW Integration

112

12.

Close Pyramix, reboot the workstation, and then open Pyramix Virtual Studio.

Pyramix will not connect to the MC properly without rebooting the workstation.

The MC will now load the default Pyramix Application Set if a project is open. Other-

wise, the Application Set will

not

be loaded, but the Soft Keys at the top-left illuminate

to show that EuCon communication is enabled.

NOTE: Since the MC only accesses the functions of Pyramix Virtual Studio, this manual

does not document those functions. Refer to the Pyramix Virtual Studio man-

ual for specific information.

11.4.2 Getting Started

To quickly get started:

Open Pyramix Virtual Studio by double-clicking the shortcut on the Windows

desktop or select it from the

Start

menu.

Use the right trackball and keyboard on the MC to control the Pyramix worksta-

tion.

When Pyramix first launches (before a project is loaded), the default MC Applica-

tion Set displays the following options on the MC’s Soft Keys (Pref, View, Edit,

Automation, Open, Save, and New Project From Template).

For those unfamiliar with Pyramix, we suggest starting with a template project that

has tracks, routing, and monitoring already set up. Merging Technologies has cre-

ated several projects to easily and quickly begin working with Pyramix.

Press the

New Project From Template

Soft Key.

A dialog box opens containing the contents of the Pyramix Template folder. Dou-

ble-click on the Euphonix folder to choose from the template projects created by

Merging Technologies.

Содержание MC Pro





























































































































































Результаты поиска

Содержание MC Pro

Отзывы:

Avid Technology MC Pro, Руководство по эксплуатации, Страница: 109 / 156

Результаты поиска

Содержание MC Pro

Отзывы: