Avid Technology MC Pro, Руководство по эксплуатации, Страница: 82 / 156

Media Application Controller Operation Guide Studio Monitor Express (Windows)
85
9.7 Config
Figure 9-7 Config Tab
The Config tab displays the current sample rate, sets various levels, and enables the
hardware inputs and outputs that patch to sources and destinations.
Set Dim Level : This sets the attenuation amount (in dB) for the program signal when
using the talkback function.
Set Fixed Level
: This sets the fixed output level, which is selectable in the Main tab for
the Control Room output. This is useful for setups that have been calibrated to a specific
db level and must maintain a fixed output level.
CPU Usage : This meter shows SME’s CPU usage.
Sample Rate : This shows the current sample rate to which SME is locked. This is only
an indicator since the sample rate is determined by your sound card’s settings.
Settings : This enables saving the current settings or loading previous settings, to quickly
switch between different SME configurations.
Enable hardware ports : This allows explicitly enabling or disabling each SME port.
This limits the ASIO stream’s inputs and outputs monitored by SME, thus minimizing
traffic on the PCI bus to only those ports necessary for the current setup. Only ports en-
abled here are available for routing to or from on the other tabs.