Avid Technology MC Pro, Руководство по эксплуатации

Страница: 41 / 156

Media Application Controller Operation Guide MC Preference Settings
32
will not be established at this point.
• When you log out, all EuCon based processes are shutdown and relaunched again
when you log in. This ensures that the new custom network settings are applied to
the workstation.
• Alternatively, you may restart your workstations, although it should not be neces-
sary.
• Re-attach all your workstations and CM408T modules.
4.4.2 To set the system back to default multicasting settings:
• Connect to all the workstations and modules you want to change settings for.
• Only workstations assigned to the 4 workstation switches will be affected by this
change.
• Only CM408T modules “Assigned to this MC” will be affected by this change
• Go to Euphonix menu > Prefs > Network tab.
• Deselect the “Use Custom Settings” button
• The default factory multicast settings should now appear in the fields below in
DIM lettering (see below).
Base: 224.1.239.0
Mask: 255.255.255.0
Discovery: 224.1.239.2 Port: 4242
EuCon 224.1.239.42 Port: 4245
Logging: 224.1.239.3 Port: 4243
• Go to the Setup > Modules page on the MC and “remove” all the attached
CM408T modules.
• Restart all CM408T modules by pressing the RESET button located on the bottom
front of the units.
• Restart the MC:
• Go to: Euphonix Menu > Shutdown