AudioCodes Mediant 500 E-SBC, Руководство пользователя

Страница: 877 / 920

User's Manual 54. Configuration Parameters Reference
Version 6.8 877 Mediant 500 E-SBC
Parameter Description
CLI: trkgrpid-prefix
[AddTrunkGroupAsPrefix]

[0] No = (Default) Don't add Trunk Group ID as prefix.

[1] Yes = Add Trunk Group ID as prefix to called number.
Notes:

This option can be used to define various routing rules.

To use this feature, you must configure the Trunk Group IDs (see
Configuring Trunk Group Table on page
353 ).
Web: Add Trunk ID as Prefix
EMS: Add Port ID As Prefix
CLI: trk-id-as-prefix
[AddPortAsPrefix]
Determines whether or not the slot number/port number/Trunk ID is
added as a prefix to the called (destination) number for Tel-to-IP
calls.

[0] No (Default)

[1] Yes
If enabled, the device adds the following prefix to the called phone
number: slot number (a single digit in the range of 1 to 6) and port
number/Trunk ID (single digit in the range 1 to 8). For example, for
the first trunk/channel located in the first slot, the number "11" is
added as the prefix.
This option can be used to define various routing rules.
Web/EMS: Add Trunk Group
ID as Prefix to Source
CLI: trkgrpid-pref2source
[AddTrunkGroupAsPrefixTo
Source]
Determines whether the device adds the Trunk Group ID (from
where the call originated) as the prefix to the calling number (i.e.
source number).

[0] No (default)

[1] Yes
Web: Replace Empty
Destination with B-channel
Phone Number
EMS: Replace Empty Dst With
Port Number
CLI: empty-dst-w-bch-nb
[ReplaceEmptyDstWithPortNu
mber] Determines whether the internal channel number is used as the
destination number if the called number is missing.

[0] No (default)

[1] Yes
Note: This parameter is applicable only to Tel-to-IP calls and if the
called number is missing.
[CopyDestOnEmptySource] Determines whether the destination number is copied to the source
number if no source number is present, for Tel-to-IP calls.

[0] = (Default) Source Number is left empty.

[1] = If the Source Number of a Tel-to-IP call is empty, the
Destination Number is copied to the Source Number.
Web: Add NPI and TON to
Calling Number
EMS: Add NPI And TON As
Prefix To Calling Number
CLI: npi-n-ton-to-cng-nb
[AddNPIandTON2CallingNum
ber] Determines whether the Numbering Plan Indicator (NPI) and Type of
Numbering (TON) are added to the Calling Number for Tel-to-IP
calls.

[0] No = (Default) Do not change the Calling Number.

[1] Yes = Add NPI and TON to the Calling Number ISDN Tel-to-IP
call.
For example: After receiving a Calling Number of 555, NPI of 1, and
TON of 3, the modified number becomes 13555. This number can
later be used for manipulation and routing.
Web: Add NPI and TON to
Called Number
EMS: Add NPI And TON As
Prefix To Called Number
CLI: npi-n-ton-to-cld-nb
[AddNPIandTON2CalledNumb Determines whether NPI and TON are added to the Called Number
for Tel-to-IP calls.

[0] No = (Default) Do not change the Called Number.

[1] Yes = Add NPI and TON to the Called Number of ISDN Tel-to-
IP call.
For example: After receiving a Called Number of 555, NPI of 1 and