AudioCodes Mediant 500 E-SBC, Руководство пользователя

Страница: 707 / 920

User's Manual 54. Configuration Parameters Reference
Version 6.8 707 Mediant 500 E-SBC
54.2.2 Multiple VoIP Network Interfaces and VLAN Parameters
The IP network interfaces and VLAN parameters are described in the table below.
Table 54-10: IP Network Interfaces and VLAN Parameters
Parameter Description
Interface Table
Web: Interface Table
EMS: IP Interface Settings
CLI: configure voip >
interface network-if display
[InterfaceTable]
This table parameter configures the Interface table. The format of the ini
file table parameter is as follows:
[InterfaceTable]
FORMAT InterfaceTable_Index = InterfaceTable_ApplicationTypes,
InterfaceTable_InterfaceMode, InterfaceTable_IPAddress,
InterfaceTable_PrefixLength, InterfaceTable_Gateway,
InterfaceTable_VlanID, InterfaceTable_InterfaceName,
InterfaceTable_PrimaryDNSServerIPAddress,
InterfaceTable_SecondaryDNSServerIPAddress,
InterfaceTable_UnderlyingDevice;
[\InterfaceTable]
For a detailed description of this table, see ''Configuring IP Network
Interfaces'' on page
115 .
Note: For this parameter to take effect, a device reset is required.
[EnableNTPasOAM] Defines the application type for Network Time Protocol (NTP) services.

[1] = OAMP (default)

[0] = Control
Note: For this parameter to take effect, a device reset is required.
54.2.3 Routing Parameters
The IP network routing parameters are described in the table below.
Table 54-11: IP Network Routing Parameters
Parameter Description
Web: Send ICMP
Unreachable Messages
[DisableICMPUnreachable] Enables sending of ICMP Unreachable messages.

[0] Enable = (Default) Device sends these messages.

[1] Disable = Device does not send these messages.
Web: Send and Receive
ICMP Redirect Messages
[DisableICMPRedirects] Enables sending and receiving of ICMP Redirect messages.

[0] Enable = (Default) Device sends and accepts these messages.

[1] Disable = Device rejects these messages and doesn't send them.
Static Route Table
Web/EMS : Static Route
Table
CLI: configure voip > static
[StaticRouteTable]
Defines up to 30 static IP routes for the device. The ini file table
parameter format is:
[ StaticRouteTable ]
FORMAT StaticRouteTable_Index = StaticRouteTable_DeviceName,
StaticRouteTable_Destination, StaticRouteTable_PrefixLength,
StaticRouteTable_Gateway, StaticRouteTable_Description;
[ \StaticRouteTable ]
For a description, see ''Configuring Static IP Routes'' on page 123 .