AudioCodes Mediant 500 E-SBC, Руководство пользователя

Страница: 508 / 920

User's Manual 508 Document #: LTRT-10437
Mediant 500 E-SBC
Parameter Description
except REGISTER.
ReRoute IP Group ID
CLI: re-route-ip-group-id
[IPOutboundManipulation_ReRouteIP
GroupID]
Defines the IP Group that initiated (sent) the SIP redirect
response (e.g., 3xx) or REFER message. This parameter
is typically used for re-routing requests (e.g., INVITEs)
when interworking is required for SIP 3xx redirect
responses or REFER messages.
The default is -1 (i.e., not configured).
Notes:

This parameter functions together with the 'Call
Trigger' parameter (see below).

For more information on interworking of SIP 3xx
redirect responses or REFER messages, see
''Interworking SIP 3xx Redirect Responses'' on page
457 and ''Interworking SIP REFER Messages'' on
page 459 , respectively.
Call Trigger
CLI: trigger
[IPOutboundManipulation_Trigger]
Defines the reason (i.e, trigger) for the re-routing of the
SIP request:

[0] Any = (Default) Re-routed for all scenarios (re-
routes and non-re-routes).

[1] 3xx = Re-routed if it triggered as a result of a SIP
3xx response.

[2] REFER = Re-routed if it triggered as a result of a
REFER request.

[3] 3xx or REFER = Applies to options [1] and [2].

[4] Initial only = Regular requests that the device
forwards to a destination. In other words, re-routing of
requests triggered by the receipt of REFER or 3xx
does not apply.
Operation Manipulation Rule - Action
Manipulated Item
CLI: manipulated-uri
[IPOutboundManipulation_IsAdditional
Manipulation]
Defines the element in the SIP message that you want
manipulated.

[0] Source URI = (Default) Manipulates the source SIP
Request-URI user part.

[1] Destination URI = Manipulates the destination SIP
Request-URI user part.

[2] Calling Name = Manipulates the calling name in
the SIP message.
Remove From Left
CLI: remove-from-left
[IPOutboundManipulation_RemoveFro
mLeft]
Defines the number of digits to remove from the left of the
manipulated item prefix. For example, if you enter 3 and
the user name is "john", the new user name is "n".
Remove From Right
CLI: remove-from-right
[IPOutboundManipulation_RemoveFro
mRight]
Defines the number of digits to remove from the right of
the manipulated item prefix. For example, if you enter 3
and the user name is "john", the new user name is "j".
Leave From Right
CLI: leave-from-right
[IPOutboundManipulation_LeaveFrom
Right]
Defines the number of digits to keep from the right of the
manipulated item.