AudioCodes Mediant 500 E-SBC, Руководство пользователя

Страница: 389 / 920

User's Manual 24. Routing
Version 6.8 389 Mediant 500 E-SBC

Rule 6, 7, and 8 (Forking Group rule): For all callers (*), if the called phone number
prefix is 100, the call is sent to Rule 7 and 9 (belonging to Forking Group "1"). If their
destinations are unavailable and alternative routing is enabled, the call is sent to Rule
8 (Forking Group "2").

Rule 9 (IP-to-IP rule): If an incoming IP call from Source IP Group 2 with domain.com
as source host prefix in its SIP Request-URI, the IP call is sent to IP address
10.33.45.65.
Table 24-1: Example of Tel-to-IP Source Phone Number Manipulation Rules
Paramet
er
Rule 1 Rule 2 Rul
e 3
Rule 4 Rule
5
Rule 6 Rule 7 Rule 8 Rule 9
Src.
Trunk
Group ID * 0 1 - - - - - -
Src.
Trunk
Group ID - - * 1 - * * * -
Dest.
Phone
Prefix 10 10 20 [5,7-9] 00 100 100 100 *
Source
Phone
Prefix 100 100 * * * * * * *
Dest. IP
Address 10.33.45.6
3
10.33.45.5
0
- domain.co
m
0.0.0.
0
10.33.45.6
8
10.33.45.6
7
domain.co
m
10.33.45.6
5
Dest IP
Group ID - - 1 - - - - - -
IP Profile
ID 1 1 - - - - - - -
Cost
Group ID Weekend Weekend_
B
- - - - - - -
Forking
Group - - - 1 2 1 -
Table 24-2: Outbound IP Routing Table Parameter Descriptions
Parameter Description
Index
[PREFIX_Index]
Defines an index number for the new table record.
Web/EMS: Tel to IP Routing
Mode
CLI: configure voip > gw routing
general-setting > tel2ip-rte-mode
[RouteModeTel2IP]
Determines whether to route received calls to an IP destination
before or after manipulation of the destination number.

[0] Route calls before manipulation = Calls are routed before
the number manipulation rules are applied (default).

[1] Route calls after manipulation = Calls are routed after the
number manipulation rules are applied.
Notes:

This parameter is not applicable if outbound proxy routing is
used.

For number manipulation, see ''Configuring Source/Destination
Number Manipulation'' on page
361 .