AudioCodes Mediant 500 E-SBC, Руководство пользователя

Страница: 887 / 920

User's Manual 54. Configuration Parameters Reference
Version 6.8 887 Mediant 500 E-SBC
Parameter Description
Web/EMS: Handle P-Asserted-
Identity
CLI: p-assert-id
[SBCAssertIdentity]
Global parameter that defines the handling of the SIP P-
Asserted-Identity header. You can also configure this
functionality per specific calls, using IP Profiles
(IpProfile_SBCAssertIdentity). For a detailed description of this
parameter and for configuring this functionality in the IP Profile
table, see ''Configuring IP Profiles'' on page
304 .
Note: If this functionality is configured for a specific IP Profile,
the settings of this global parameter is ignored for calls
associated with the IP Profile.
Web: Keep original user in
Register
[SBCKeepContactUserinRegiste
r]
Determines whether the device replaces the Contact user with a
unique Contact user in the outgoing message in response to a
REGISTER request.

[0] Disable = (Default) The device replaces the original
Contact user with a unique Contact user, for example:

Received Contact: <sip:123@domain.com>

Outgoing (unique) Contact: <sip:FEU1_7_1@SBC>

[1] Enable = The original Contact user is retained and used
in the outgoing REGISTER request.
Note: This parameter is applicable only to REGISTER
messages received from User-type IP Groups and that are sent
to Server-type IP Groups.
Web: SBC Remote Refer Behavior
CLI: sbc-refer-bhvr
[SBCReferBehavior]
Global parameter that defines the handling of SIP REFER
requests. You can also configure this functionality per specific
calls, using IP Profiles (IpProfile_SBCRemoteReferBehavior).
For a detailed description of this parameter and for configuring
this functionality in the IP Profile table, see ''Configuring IP
Profiles'' on page
304 .
Note: If this functionality is configured for a specific IP Profile,
the settings of this global parameter is ignored for calls
associated with the IP Profile.
CLI: sbc-xfer-prefix
[SBCXferPrefix]
When the SBCReferBehavior is set to 1, the device, while
interworking the SIP REFER message, adds the prefix "T~&R-"
to the user part of the URI in the Refer-To header. After this, the
device can receive an INVITE with such a prefix (the INVITE is
sent by the UA that receives the REFER message or 302
response). If the device receives an INVITE with such a prefix, it
replaces the prefix with the value defined for the SBCXferPrefix
parameter.
By default, no value is defined.
Note: This feature is also applicable to 3xx redirect responses.
The device adds the prefix "T~&R-" to the URI user part in the
Contact header if the SBC3xxBehavior parameter is set to 1.
CLI: sbc-3xx-bhvt
[SBC3xxBehavior]
Global parameter that defines the handling of SIP 3xx redirect
responses. You can also configure this functionality per specific
calls, using IP Profiles (IpProfile_SBCRemote3xxBehavior). For
a detailed description of this parameter and for configuring this
functionality in the IP Profile table, see ''Configuring IP Profiles''
on page
304 .
Note: If this functionality is configured for a specific IP Profile,
the settings of this global parameter is ignored for calls
associated with the IP Profile.
[SBCEnforceMediaOrder] Enables the device to include all previously negotiated media