AudioCodes Mediant 500 E-SBC, Руководство пользователя

Страница: 152 / 920

User's Manual 152 Document #: LTRT-10437
Mediant 500 E-SBC
Parameter Description
Proxy Set ID
CLI: proxy-set
[IDSMatch_ProxySet]
Defines the Proxy Set(s) to which the IDS Policy is assigned. This
indicates the Proxy Sets from where the attacks are coming from. The
following syntax is supported:

A comma-separated list of Proxy Set IDs (e.g., 1,3,4)

A hyphen "-" indicates a range of Proxy Sets (e.g., 3,4-7 means
IDs 3, and 4 through 7)

A prefix of an exclamation mark "!" means negation of the set (e.g.,
!3,4-7 means all indexes excluding 3, and excluding 4 through 7)
Notes:

Only the IP address of the Proxy Set is considered (not port).

If a Proxy Set has multiple IP addresses, the device considers the
Proxy Set as one entity and includes all its IP addresses in the
same IDS count.
Subnet
CLI: subnet
[IDSMatch_Subnet]
Defines the subnet to which the IDS Policy is assigned. This indicates
the subnets from where the attacks are coming from. The following
syntax can be used:

Basic syntax is a subnet in CIDR notation (e.g., 10.1.0.0/16 means
all sources with IP address in the range 10.1.0.0–10.1.255.255)

An IP address can be specified without the prefix length to refer to
the specific IP address.

Each subnet can be negated by prefixing it with "!", which means
all IP addresses outside that subnet.

Multiple subnets can be specified by separating them with "&"
(and) or "|" (or) operations. For example:

10.1.0.0/16 | 10.2.2.2: includes subnet 10.1.0.0/16 and IP
address 10.2.2.2.

!10.1.0.0/16 & !10.2.2.2: includes all addresses except those
of subnet 10.1.0.0/16 and IP address 10.2.2.2. Note that the
exclamation mark "!" appears before each subnet.

10.1.0.0/16 & !10.1.1.1: includes subnet 10.1.0.0/16, except IP
address 10.1.1.1.
Policy
CLI: policy
[IDSMatch_Policy]
Assigns an IDS Policy (configured in ''Configuring IDS Policies'' on
page
147 ).
13.3.4 Viewing IDS Alarms
For the IDS feature, the device sends the following SNMP traps:

Traps that notify the detection of malicious attacks:
•
acIDSPolicyAlarm: The device sends this alarm whenever a threshold of a
specific IDS Policy rule is crossed. The trap displays the crossed severity
threshold (Minor or Major), IDS Policy and IDS Rule, and the IDS Policy-Match
index.
•
acIDSThresholdCrossNotification: The device sends this event for each scope
(IP address) that crosses the threshold. In addition to the crossed severity
threshold (Minor or Major) of the IDS Policy-Match index, this event shows the IP
address (or IP address:port) of the malicious attacker.