AudioCodes Mediant 500 E-SBC, Руководство пользователя

Страница: 834 / 920

User's Manual 834 Document #: LTRT-10437
Mediant 500 E-SBC
Parameter Description

[64] USE T1 PRI = PRI interface type is forced to T1.

[128] USE E1 PRI = PRI interface type is forced to E1.

[256] START WITH B CHAN OOS = B-channels start in
the Out-Of-Service state (OOS).

[512] CHAN ALLOC LOWEST = CC allocates B-
channels starting from the lowest available B-channel id.

[1024] CHAN ALLOC HIGHEST = CC allocates B-
channels starting from the highest available B-channel id.

[16384] CC_TRANSPARENT_UUI bit: The UUI-protocol
implementation of CC is disabled allowing the application
to freely send UUI elements in any primitive, regardless
of the UUI-protocol requirements (UUI Implicit Service 1).
This allows more flexible application control on the UUI.
When this bit is not set (default behavior), CC implements
the UUI-protocol as specified in the ETS 300-403
standards for Implicit Service 1.

[65536] GTD5 TBCT = CC implements the VERIZON-
GTD-5 Switch variant of the TBCT Supplementary
Service, as specified in FSD 01-02-40AG Feature
Specification Document from Verizon. Otherwise, TBCT
is implemented as specified in GR-2865-CORE
specification (default behavior).
Note: When using the ini file to configure the device to
support several ISDNGeneralCCBehavior features, add the
individual feature values. For example, to support both [16]
and [32] features, set ISDNGeneralCCBehavior = 48 (i.e., 16
+ 32).
Web/EMS: Outgoing Calls Behavior
CLI: isdn-bits-outgoing-calls-behavior
[ISDNOutCallsBehavior]
Determines several behaviour options (bit fields) that
influence the behaviour of the ISDN Stack outgoing calls. To
select options, click the arrow button, and then for each
required option, select 1 to enable. The default is 0 (i.e.,
disable).

[2] USER SENDING COMPLETE =The default behavior
of the device (when this bit is not set) is to automatically
generate the Sending-Complete IE in the Setup
message. This behavior is used when overlap dialing is
not needed. When overlap dialing is needed, set this bit
and the behavior is changed to suit the scenario, i.e.,
Sending-Complete IE is added when required in the
Setup message for Enblock mode or in the last Digit with
Overlap mode.

[16] USE MU LAW = The device sends G.711-m-Law in
outgoing voice calls. When disabled, the device sends
G.711-A-Law in outgoing voice calls.
Note: This option is applicable only to the Korean variant.

[128] DIAL WITH KEYPAD = The device uses the
Keypad IE to store the called number digits instead of the
CALLED_NB IE.
Note: This option is applicable only to the Korean variant
(Korean network). This is useful for Korean switches that
don't accept the CALLED_NB IE.

[256] STORE CHAN ID IN SETUP = The device forces
the sending of a Channel-Id IE in an outgoing Setup
message even if it's not required by the standard (i.e.,