AudioCodes Mediant 500 E-SBC, Руководство пользователя

Страница: 699 / 920

User's Manual 54. Configuration Parameters Reference
Version 6.8 699 Mediant 500 E-SBC
Parameter Description
[SNMPReadOnlyCommunityStrin
g_x] include only the following:

Upper- and lower-case letters (a to z, and A to Z)

Numbers (0 to 9)

Hyphen (-)

Underline (_)
For example, "Public-comm_string1".
The default is "public".
Community String - Read / Write
configure system > snmp > rw-
community-string
[SNMPReadWriteCommunityStri
ng_x]
Defines a read-write SNMP community string. Up to five read-
write community strings can be configured.
The valid value is a string of up to 19 characters that can
include only the following:

Upper- and lower-case letters (a to z, and A to Z)

Numbers (0 to 9)

Hyphen (-)

Underline (_)
For example, "Private-comm_string1".
The default is "private".
Trap Community String
configure system > snmp trap >
community-string
[SNMPTrapCommunityString]
Defines the community string for SNMP traps.
The valid value is a string of up to 19 characters that can
include only the following:

Upper- and lower-case letters (a to z, and A to Z)

Numbers (0 to 9)

Hyphen (-)

Underline (_)
For example, "Trap-comm_string1".
The default is "trapuser".
SNMP Trusted Managers Table
Web: SNMP Trusted Managers
CLI: configure system > snmp >
trusted-managers
[SNMPTrustedMgr_x]
Defines up to five IP addresses of remote trusted SNMP
managers from which the SNMP agent accepts and processes
SNMP Get and Set requests.
Notes:

By default, the SNMP agent accepts SNMP Get and Set
requests from any IP address, as long as the correct
community string is used in the request. Security can be
enhanced by using Trusted Managers, which is an IP
address from which the SNMP agent accepts and processes
SNMP requests.

If no values are assigned to these parameters any manager
can access the device.

Trusted managers can work with all community strings.
SNMP V3 Users Table
Web/EMS: SNMP V3 Users
CLI: configure system > snmp v3-
users
[SNMPUsers]
This para meter table defines SNMP v3 users. The format of this
parameter is as follows:
[SNMPUsers]
FORMAT SNMPUsers_Index = SNMPUsers_Username,
SNMPUsers_AuthProtocol, SNMPUsers_PrivProtocol,
SNMPUsers_AuthKey, SNMPUsers_PrivKey,
SNMPUsers_Group;