AudioCodes Mediant 500 E-SBC, Руководство пользователя

Страница: 260 / 920

User's Manual 260 Document #: LTRT-10437
Mediant 500 E-SBC
Parameter Description
CLI: interface-name
[SIPInterface_InterfaceName
]
The valid value is a string of up to 21 characters.
Network Interface
CLI: network-interface
[SIPInterface_NetworkInterf
ace]
Assigns a Control-type IP network interface to the SIP Interface. This
string value must be identical (case-sensitive) to that configured in
the 'Interface Name' field of the Interface table (see ''Configuring IP
Network Interfaces'' on page
115 ).
By default, no value is defined.
Application Type
CLI: application-type
[SIPInterface_ApplicationTy
pe]
Defines the application type associated with the SIP Interface.

[0] GW/IP2IP (default) = Gateway / IP-to-IP application.

[1] SAS = Stand-Alone Survivability (SAS) application.

[2] SBC = SBC application.
UDP Port
CLI: udp-port
[SIPInterface_UDPPort]
Defines the listening and source UDP port.
The valid range is 1 to 65534. The default is 5060.
Notes:

This port must be outside of the RTP port range.

The base UDP port number (BaseUDPPort parameter) for RTP
traffic must be greater than the highest UDP port configured for a
SIP Interface. For example, if your highest configured UDP port
for a SIP Interface is 6060, you must configure the BaseUDPPort
parameter to any value greater than 6060. For more information
on base UDP port, see Configuring RTP Base UDP Port on page
176.

Each SIP Interface must have a unique signaling port (i.e., no two
SIP Interfaces can share the same port - no port overlapping).
TCP Port
CLI: tcp-port
[SIPInterface_TCPPort]
Defines the listening TCP port.
The valid range is 1 to 65534. The default is 5060.
Notes:

This port must be outside of the RTP port range.

Each SIP Interface must have a unique signaling port (i.e., no two
SIP Interfaces can share the same port - no port overlapping).
TLS Port
CLI: tls-port
[SIPInterface_TLSPort]
Defines the listening TLS port.
The valid range is 1 to 65534. The default is 5061.
Notes:

This port must be outside of the RTP port range.

Each SIP Interface must have a unique signaling port (i.e., no two
SIP Interfaces can share the same port - no port overlapping).