AudioCodes Mediant 500 E-SBC, Руководство пользователя

Страница: 364 / 920

User's Manual 364 Document #: LTRT-10437
Mediant 500 E-SBC
Parameter Rule 1 Rule 2 Rule 3 Rule 4 Rule 5
Suffix to Add - 23 8 - -
Number of
Digits to Leave
- - 4 - -
Presentation Allowed Restricted - - -
Table 23-1: Number Manipulation Tables Parameter Descriptions
Parameter Description
Index
[_Index]
Defines an index number for the new table record.
Manipulation Name
[_ManipulationName]
Defines an arbitrary name to easily identify the manipulation rule.
The valid value is a string of up to 20 characters. By default, no value is
defined.
Matching Characteristics (Rule)
Web: Destination Prefix
EMS: Prefix
CLI: dst-prefix
[_DestinationPrefix]
Defines the destination (called) telephone number prefix and/or suffix.
You can use special notations for denoting the prefix. For example,
[100-199](100,101,105) denotes a number that starts with 100 to 199
and ends with 100, 101 or 105. You can also use the $ sign to denote
calls without a called number. For a description of available notations,
see ''Dialing Plan Notation for Routing and Manipulation Tables'' on
page
689 .
Web/EMS: Source Prefix
CLI: src-prefix
[_SourcePrefix]
Defines the source (calling) telephone number prefix and/or suffix. You
can use special notations for denoting the prefix. For example, [100-
199](100,101,105) denotes a number that starts with 100 to 199 and
ends with 100, 101 or 105. You can also use the $ sign to denote calls
without a calling number. For a description of available notations, see
''Dialing Plan Notation for Routing and Manipulation Tables'' on page
689 .
Web/EMS: Source IP
Address
CLI: src-ip-address
[_SourceAddress]
Defines the source IP address of the caller. This is obtained from the
Contact header in the INVITE message.
Notes:

This parameter is applicable only to the number manipulation tables
for IP-to-Tel calls.

The source IP address can include the 'x' wildcard to represent
single digits. For example: 10.8.8.xx represents all IP addresses
between 10.8.8.10 to 10.8.8.99.

The source IP address can include the asterisk (*) wildcard to
represent any number between 0 and 255. For example, 10.8.8.*
represents all IP addresses between 10.8.8.0 and 10.8.8.255.
Web: Source Host Prefix
CLI: src-host-prefix
[_SrcHost]
Defines the URI host name prefix of the incoming SIP INVITE message
in the From header.
Notes:

This parameter is applicable only to the number manipulation tables
for IP-to-Tel calls.

The asterisk (*) wildcard can be used to denote any prefix.

If the P-Asserted-Identity header is present in the incoming INVITE
message, then the value of this parameter is compared to the P-
Asserted-Identity URI host name (instead of the From header).