AudioCodes Mediant 500 E-SBC, Руководство пользователя

Страница: 901 / 920

User's Manual 54. Configuration Parameters Reference
Version 6.8 901 Mediant 500 E-SBC
Parameter Description
Web: SAS Entering Emergency
Mode
CLI: sas-enter-emg-mode
[SASEnteringEmergencyMode]
Determines for which sent SIP message types the device enters
SAS Emergency mode if no response is received for them from
the proxy server.

[0] = (Default) SAS enters Emergency mode only if no
response is received from sent SIP OPTIONS messages.

[1] = SAS enters Emergency mode if no response is received
from sent SIP OPTIONS, INVITE, or REGISTER messages.
Note: If the keep-alive mechanism is disabled for the Proxy Set
(in the Proxy Set table) and this parameter is set to [1], SAS
enters Emergency mode only if no response is received from
sent INVITE or REGISTER messages.
CLI: sas-indialog-mode
[SASInDialogRequestMode]
Defines how the device sends incoming SIP dialog requests
received from users when not in SAS Emergency mode.

[0] = (Default) Send according to the SIP Request-URI.

[1] = Send to Proxy server.
Web: SAS Inbound Manipulation
Mode
CLI: sas-inb-manipul-md
[SASInboundManipulationMode]
Enables destination number manipulation of incoming INVITE
messages when SAS is in Emergency mode. The manipulation
rule is done in the IP to IP Inbound Manipulation table.

[0] None (default)

[1] Emergency Only
Note: Inbound manipulation applies only to INVITE requests.
SAS Registration Manipulation Table
Web: SAS Registration
Manipulation
EMS: Stand-Alone Survivability
CLI: configure voip > sas
sasregistrationmanipulation
[SASRegistrationManipulation]
This table parameter configures the SAS Registration
Manipulation table. This table is used by the SAS application to
manipulate the SIP Request-URI user part of incoming INVITE
messages and of incoming REGISTER request AoR (To
header), before saving it to the registered users database. The
format of this table parameter is as follows:
[SASRegistrationManipulation]
FORMAT SASRegistrationManipulation_Index =
SASRegistrationManipulation_RemoveFromRight,
SASRegistrationManipulation_LeaveFromRight;
[\SASRegistrationManipulation]
For example, the manipulation rule below routes an INVITE with
Request-URI header "sip:7184002@10.33.4.226" to user
"4002@10.33.4.226" (i.e., keep only four digits from right of user
part):
SASRegistrationManipulation 0 = 0, 4;
Web: SAS IP-to-IP Routing Table
[IP2IPRouting] This table parameter configures the IP-to-IP Routing table for
SAS routing rules. The format of the ini file table parameter is as
follows:
[IP2IPRouting]
FORMAT IP2IPRouting_Index = IP2IPRouting_SrcIPGroupID,
IP2IPRouting_SrcUsernamePrefix, IP2IPRouting_SrcHost,
IP2IPRouting_DestUsernamePrefix, IP2IPRouting_DestHost,
IP2IPRouting_DestType, IP2IPRouting_DestIPGroupID,
IP2IPRouting_DestSRDID, IP2IPRouting_DestAddress,
IP2IPRouting_DestPort, IP2IPRouting_DestTransportType,
IP2IPRouting_AltRouteOptions;