AudioCodes Mediant 500 E-SBC, Руководство пользователя

Страница: 149 / 920

User's Manual 13. Security
Version 6.8 149 Mediant 500 E-SBC
6. Click Add ; the following dialog box appears:
Figure 13-6: IDS Rule Table - Add Record
The figure above shows a configuration example. If 15 malformed SIP messages are
received within a period of 30 seconds, a minor alarm is sent. Every 30 seconds, the
rule’s counters are cleared. In addition, if more than 25 malformed SIP messages are
received within this period, the device blacklists the remote IP host from where the
messages were received for 60 seconds.
7. Configure an IDS Rule according to the parameters described in the table below.
8. Click Submit , and then save ("burn") your settings to flash memory.
Table 13-4: IDS Rule Table Parameter Descriptions
Parameter Description
Index
CLI: rule-id
[IDSRule_RuleID]
Defines an index number for the new table record.
Reason
CLI: reason
[IDSRule_Reason]
Defines the type of intrusion attack (malicious event).

[0] Any = All events listed below are considered as attacks
and are counted together.

[1] Connection abuse (default) = TLS authentication failure.

[2] Malformed message =

Message exceeds a user-defined maximum message
length (50K)

Any SIP parser error

Message Policy match (see ''Configuring SIP Message
Policy Rules'')

Basic headers not present

Content length header not present (for TCP)

Header overflow

[3] Authentication failure =

Local authentication ("Bad digest" errors)

Remote authentication (SIP 401/407 is sent if original
message includes authentication)

[4] Dialog establish failure =

Classification failure (see ''Configuring Classification
Rules'' on page
480 )

Routing failure

Other local rejects (prior to SIP 180 response)

Remote rejects (prior to SIP 180 response)