AudioCodes Mediant 500 E-SBC, Руководство пользователя

Страница: 593 / 920

User's Manual 40. Automatic Update Mechanism
Version 6.8 593 Mediant 500 E-SBC
To support this feature, you need to include the case-sensitive string, "<MAC>" anywhere
in the configured file name of the URL, for example:
IniFileURL = 'https://www.company.com/config_ <MAC> .ini'
The device automatically replaces the string with its hardware MAC address, resulting in a
file name request that contains the device's MAC address, for example,
config_00908F033512.ini . Therefore, you can configure all the devices with the same URL
and file name.
40.2.9 Automatic Update Configuration Examples
This section provides a few examples on configuring the Automatic Update feature.
40.2.9.1 Automatic Update for Single Device
This simple example describes how to configure the Automatic Update feature for updating
a single device. In this example, the device queries the provisioning server for software,
configuration and auxiliary files every 24 hours.

To set up Automatic Provisioning for single device (example):
1. Set up an HTTP Web server (e.g., http://www.company.com) and place all the
required configuration files on this server.
2. Configure the device with the IP address of the DNS server for resolving the domain
name (e.g., http://www.company.com) that is used in the URL of the provisioning
server. You configure this in the Interface table:
•
ini File:
[ InterfaceTable ]
FORMAT InterfaceTable_Index =
InterfaceTable_ApplicationTypes,
InterfaceTable_InterfaceMode, InterfaceTable_IPAddress,
InterfaceTable_PrefixLength, InterfaceTable_Gateway,
InterfaceTable_VlanID, InterfaceTable_InterfaceName,
InterfaceTable_PrimaryDNSServerIPAddress,
InterfaceTable_SecondaryDNSServerIPAddress,
InterfaceTable_UnderlyingDevice;
InterfaceTable 0 = 6, 10, 10.15.7.95, 16, 10.15.0.1, 1,
"Voice", 80.179.52.100, 0.0.0.0, "vlan 1";
[ \InterfaceTable ]
•
CLI:
# configure voip
(config-voip)# interface network-if 0
(network-if-0)# primary-dns 80.179.52.100
3. Configure the device with the following Automatic Update settings:
a. Automatic Update is done every 24 hours (1440 minutes):
♦
ini File:
AutoUpdateFrequency = 1440
♦
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# update-frequency 1440
b. Automatic Update of software file (.cmp):
♦
ini File:
AutoCmpFileUrl = 'https://www.company.com/sw.cmp'
♦
CLI: