Arcteq AQ-M255 Скачать руководство пользователя

Страница: 10 / 442

Changes

- Increased the consistency in terminology

- Various image upgrades

- Visual update to the order codes

Revision

2.05

Date

22.6.2021

Changes

- Fixed phase current measurement continuous thermal withstand from 30A to 20A.

- Fixed lots of timing errors written to registers table. "Prefault" is -200 ms from Start event, "Pretrigger" is

-20 ms from trip (or start if fault doensn't progress to trip), "Fault" is start (or trip if fault doesn't progress

to trip).

- Added event history technical data

Revision

2.06

Date

21.6.2022

Changes

- Improved descriptions generally in many chapters.

- Improved readability of a lot of drawings and images.

- Order codes have been revised.

- Added LN mode parameters to all functions (On, Blocked, Test, Test/Blocked, Off).

- Added color themes parameter description.

- Improved color sleep mode description.

- Improved alarm function color behavior description and images.

- Added operation time with different measurement values vs setting ratio in instant operation mode to

non-directional overcurrent function description.

- Fixed bias calculation formula for restricted earth fault function. Was correctly in the code, just written

wrong in the manual.

- Added 30 s pretriggering time for disturbance recorder (AQ-250 devices only).

- Added new trip detections and fault types to measurement value recorder.

- Added user description parameter descriptions for digital inputs, digital outputs, logical inputs, logical

outputs and GOOSE inputs.

- Arc point sensor HSO1 and HSO2 position fixed.

- Added spare part codes and compatibilities to option cards.

1.2 Version 1 revision notes

Table. 1.2 - 2. Version 1 revision notes

Revision

1.00

Date

20.1.2017

Changes

The first revision for AQ-M255 IED.

Revision

1.01

Date

5.1.2018

Q-M255

-M255

Instruction manual

Version: 2.06

Содержание AQ-M255


























































































































































































































































































































































































































































Результаты поиска

Содержание AQ-M255

Отзывы:

Похожие инструкции для AQ-M255

Бренды по названию

Популярные бренды

Arcteq AQ-M255, Инструкция по эксплуатации

Результаты поиска

Содержание AQ-M255

Отзывы:

Похожие инструкции для AQ-M255

Бренды по названию

Популярные бренды