Arbiter Systems 1088A, Руководство по эксплуатации

Страница: 230 / 279

210 Options List
System Configure Password
To configure the system password follow these instructions. From Figure C.32, select the Password
tab. Figure C.34 shows where to configure the System password. In the System page, click the
Password tab and fill in the current and new password. Click the Apply button. Password char-
acters must be from ASCII 33 to ASCII 126, and passwords may be from 1 to 16 characters in
length. Remember to write down any new password and keep it in a safe place.
Apply Reset
Current Password
New Password
Confirm New Password
Figure C.34: Configure System Password
System Update
Update packages may include uploading more than one file to the Option 34. Make sure to follow the
instructions included with the update packages, and follow these instructions. From Figure C.32,
select the Update tab and click the Choose File button shown in Figure C.35. This should open
your file browser in which you should be able to locate the file package obtained from Arbiter
Systems. Click the Update button and the file should load to the Option 34. After uploading the
package the Option 34 must be rebooted for the changes to take effect.
Make sure that the computer
and clock do not lose power during the upload process.
Upload Reset
Upload Package File
Choose File no file selected
Figure C.35: Update System Firmware Package