4-11
Uploading a Job from the Panel,
Continued
•
If Job Name Does Not Exist on PC. If no job with this name exists on the PC, the
programmer begins the upload after you click on the Start button. A dialog similar to
the one shown in Figure 4-16 appears, indicating the progress of the file transfer.
Figure 4-16. Transfer in Progress
The following message appears when the upload is complete.
Figure 4-17. Upload Complete Message
4.
Click OK to continue. The next message indicates that the programmer is unbuilding the
job.
Figure 4-18. Unbuilding AUTOPULSE Z-28 Job Message
The programmer displays the next message to indicate that the job has been successfully
unbuilt and is now stored in the APJOBS folder.
Figure 4-19. Job Unbuild Complete Message
To open this job, refer to "Opening an Existing Job Stored on the PC," earlier in this
chapter.
