Step 3. Edit An Input Statement’s Properties,
Continued
10-9
Figure 10-8. The NOT Operator
5.
Click on the Opcode and Qualifier list boxes and choose an Opcode and qualifier. Refer to
Table 10-1 for a list of Opcodes and qualifiers.
Associating Points with
Input Statements
After defining the Opcode and Qualifier for an input statement, you need to associate a point
with the statement. To do this, follow these steps.
1.
In the list on the right side of the screen, click on the name of the point.
2.
Hold down the left mouse button and drag the highlighted point from the list to the
appropriate input statement.
Continued on next page
3.
Release the mouse button.
