Page 127 of 130
Figure 142: Example of DSL Expresse diagnostic test
Our Example circuit shows a pretty clean line. The inserted picture includes an example of a circuit with a
62m Bridge Tap detected.
Bonded Circuits:
Both ports will be selectable under the “port” column (see top of picture) to compare the health and status
of both lines. Some indicators of bonded instability are:
•
Loop Length: Should be relatively the same for both pairs
•
Bridge Tap(s)
•
Imbalanced MABR between both ports (i.e.: 50Mbps on primary, 22 on secondary)
•
Any detected faults (high attenuation, impulse noise, cross talk, etc.) once removed
can balance the lines without needlessly changing distribution pairs.
Figure 143: Results of the Test
