Ace ACE-3205, Инструкция по установке и эксплуатации

Страница: 127 / 418

Installation and Operation Manual Chapter 4 Configuration
ACE-3105, ACE-3205 Ver. 5.2 Configuring for Management 4-37
Table 4-26. Syslog Server Parameters
Parameter Description Possible Values
Logging status Determines whether logging to the Syslog
server is enabled or disabled. When disabled,
ACE-3105, ACE-3205 logs the events
internally. Enabled
Disabled
Default: Disabled
Server IP
address IP address of the Syslog server to which the
event logs are sent. 0.0.0.0 –
255.255.255.255
Server UDP port The UDP port of the Syslog server.
Note: The port cannot be changed when the
logging status is enabled.
1–65535
Default: 514
Device UDP
port The local UDP port from which the Syslog
messages are sent.
Note: The port cannot be changed when the
logging status is enabled.
1–65535
Default: 514
Facility Identifies the software module, task or
function from which the Syslog messages are
sent. Local 1 – Local 7
Default: Local 1
Severity level Only events that their severity equals or
exceeds the selected severity level are sent.
The severity levels are:
•
Critical – corresponds to the Emergency
(0) severity level of Syslog
• Major – corresponds to the Alert (1) and
Critical (2) severity levels of Syslog
•
Minor – corresponds to the Error (3)
severity level of Syslog
• Warning – corresponds to the Warning (4)
severity level of Syslog
•
Event – corresponds to the Notice (5)
severity level of Syslog
• Info – corresponds to the Informational
(6) severity level of Syslog
•
Debug – corresponds to the Debug (7)
severity level of Syslog
Note: The severity level can be changed only
when the logging status is disabled.
Critical
Major
Minor
Warning
Event
Info
Debug
Default: Major