Ace ACE-3205, Инструкция по установке и эксплуатации

Страница: 204 / 418

Chapter 4 Configuration Installation and Operation Manual
4-114 Configuring for Operation ACE-3105, ACE-3205 Ver. 5.2
Configuring the ATM/TDM Service Parameters for the PW
ATM or TDM traffic that is carried over the pseudowire connection is defined as
the connection's service. The service parameters are displayed and configured
according to the previously selected PW type.
³
To access the ATM/TDM service parameters:
•
From the PW menu (see
Figure 4-77
), select Service Parameters.
The Service Parameters appears and displays ATM ( Figure 4-80 ) or TDM
(
Figure 4-82
) service parameters, depending on the PW type.
ACE-3205 – RAD Data Communications
Configuration> Applications> Multiservice over PSN> PW > Service
parameters
PW number ... (1)
PW name ... (PW-1)
PW type ... (ATM VC 1 to 1)
1. AAL5 SDU termination type > (Router)
2. Max cells concentration ... (1)
3. Timeout mode > (Enable)
4. Timeout (usec) ... (100)
5. AAL5 mode > (Disable)
6. Attachment circuit >
>
Please select item <1 to 6>
ESC-previous menu; !-main menu; &-exit
Figure 4-80. ATM Pseudowire Service Parameters Menu
Table 4-72. ATM Pseudowire Service Parameters
Parameter Description Possible Values
PW number Displays the PW number as defined in the PW
menu (read-only) See Table 4-69
PW name Displays the PW name as defined in the PW
menu (read-only) See
Table 4-69
PW type Displays the PW type as defined in the PW
General Parameters menu (read-only) See
Table 4-70
AAL5 SDU
termination type Determines whether an AAL5-SDU frames that
are received from the PSN should be forwarded
to the router or forwarded to an ATM VCC.
Relevant only if the selected PW type (see
Table 4-70 ) is AAL5-SDU.
Cannot be changed dynamically (on-the-fly).
ATM
Router
Default: Router