Ace ACE-3205, Инструкция по установке и эксплуатации

Страница: 123 / 418

Installation and Operation Manual Chapter 4 Configuration
ACE-3105, ACE-3205 Ver. 5.2 Configuring for Management 4-33
Configuring the Summer Time Parameters
The summer time parameters define whether/how the unit should automatically
change its internal time when daylight saving time is applied in the geographical
region where ACE-3105, ACE-3205 is installed. This feature can be disabled,
activated on a specific date, or customarily recur.
³
To set the summer time parameters:
1. From the Date and Time menu, select Summer Time.
The Summer Time menu is displayed.
2. Select the required summer time mode: Disabled, Recurring or Date.
Based on your selection (
Table 4-23
), the Summer Time menu displays
the relevant options.
ACE-3205 – RAD Data Communications
Configuration> System> Date and Time> Summer time
1. Mode > (Disable\Date\Recurring)
>
Please select item <1 to 1>
ESC-Previous menu; !-Main menu; &-Exit
Figure 4-28. Summer Time Mode Selection
Table 4-23. Summer Time Modes
Parameter Description Possible Values
Disable The summer time feature is disabled
Date The daylight saving time shifting is set to
occur once on a given date, as defined in
the parameters that appear below See
Figure 4-30
and
Table 4-25
Recurring The daylight saving time shifting is set to
recur periodically, as defined in the
parameters that appear below See
Figure 4-29
and
Table 4-24