Ace ACE-3205, Инструкция по установке и эксплуатации

Страница: 348 / 418

Chapter 6 Monitoring and Diagnostics Installation and Operation Manual
6-110 Recovering ACE Units ACE-3105, ACE-3205 Ver. 5.2
Active Clock > (Master)
Source > (Recovered)
Recovered ID ... (1)
2. Check that the settings of the clock match the clock settings on the opposite
unit.
Clocking issues might also cause OIF (Out of IMA Frame) irregularities (except
during SES or UAS IMA at the near end).
• Go to Monitoring>Applications>ATM>IMA>Link statistics.
OIF ... (0)
IMA Protocol Issues
³
To check that the Group ID is the same on the ACE IMA and remote IMA group:
• Go to Configuration>Applications>ATM>IMA.
4. Group ID[0 - 255] ... (0)
Check that the IMA protocol version is the same on the ACE IMA group and the
remote IMA group:
•
Go to Configuration>Applications>ATM>IMA.
8. IMA version > (1.1)
In case there are problems in the IMA control plane (ICP cells), check the
following:
1. Go to Monitoring>Applications>ATM>IMA>Link statistics.
Violation ... (0)
2. Check the number of ICP cells that are in error, invalid or missing.
3. Go to Configuration>Applications>ATM>IMA.
12. Restart group
Confirm by pressing “Y”
The IMA group restarts.
4. Restart the group on the opposite device connected to the ACE unit.
5. If the problem persists, physically disconnect all active links and reconnect
them.
6. If the problem still persists, reset the ACE unit:
7. Go to Utilities.
2. Device reset
Are you sure (Y/N)?
If the problem still persists, contact Tech Support.