Ace ACE-3205, Инструкция по установке и эксплуатации

Страница: 38 / 418

Chapter 1 Introduction Installation and Operation Manual
1-10 Functional Description ACE-3105, ACE-3205 Ver. 5.2
Figure 1-6. ACE-3205 3D Front View
Both units are fully accessible from their front panel, which includes the interface
ports, control connector and LED indicators. ACE-3205 has one or two power
connectors on its front panel, and ACE-3105 has one power connector on its rear
panel.
For information about the initial installation and required cable connections, refer
to
Chapter 2
. For information about the unit's operation and LED indicators,
refer to
Chapter 3
.
1.3 Functional Description
This section describes the following functional features of ACE-3105, ACE-3205:
• Interfaces
(see page
1-12
)
•
ATM over PSN Functionality
(see page
1-14
)
• TDM over PSN Functionality
(see page
1-15
)
•
Clock Recovery
(see page
1-16
)
• TDM over ATM Functionality
(see page
1-17
)
•
ATM Switching/Aggregation Functionality
(see page
1-17
)
• Abis Optimization
(see page
1-21
)
•
MPLS Utilization
(see page
1-22
)
• Fault Propagation and PSN Connectivity Checks
(see page
1-24
)
•
PPPoE
(see page
1-24
)
• Bridge
(see page
1-25
)
•
Physical Loopback Tests
(see page
1-27
)
• SNMP and Alarm Traps
(see page
1-28
)
•
Management
(see page
1-28
).
Block Diagrams
The following figures illustrate the internal structure of the ACE-3105 and
ACE-3205 units: