Ace ACE-3205, Инструкция по установке и эксплуатации

Страница: 101 / 418

Installation and Operation Manual Chapter 4 Configuration
ACE-3105, ACE-3205 Ver. 5.2 Configuring for Management 4-11
Configuring Alarm Traps
Alarm traps can be configured at the system level, physical layer, ATM and
multiservice over PSN layer, via the Traps menu. This configuration defines
whether traps are sent for a specific alarm type, using two settings:
•
Active – traps are sent for this alarm
•
Masked – traps are not sent for this alarm.
³
To access the Traps configuration menu:
•
From the Manager List menu (see
Figure 4-9
), select Traps.
The Traps menu is displayed.
ACE-3205 – RAD Data Communications
Configuration> System> Management> Manager list> Traps
1. System >
2. Physical >
3. Application >
>
Please select item <1 to 3>
ESC-previous menu; !-main menu; &-exit
Figure 4-10. Traps Menu
Table 4-8. Traps Configuration Menu Parameters
Parameter Description Possible Values
System Mask configuration menu for
system traps Refer to
Figure 4-11
and
Table 4-9
Physical Mask configuration menu for
physical traps Refer to
Figure 4-12
and
Table 4-10
Application Mask configuration menu for
application-level traps Refer to Figure 4-13 and
Table 4-11
³
To access the system traps configuration menu:
•
From the Traps menu, select System.
The system traps list appears.