Ace ACE-3205, Инструкция по установке и эксплуатации

Страница: 209 / 418

Installation and Operation Manual Chapter 4 Configuration
ACE-3105, ACE-3205 Ver. 5.2 Configuring for Operation 4-119
ACE-3205 – RAD Data Communications
Configuration> Applications> Multiservice over PSN> PW > Service
parameters
PW number ... (1)
PW name ... (PW-1)
PW type ... (Basic CES PSN)
1. Payload size (frames in packet) ... (2)
Payload size (bytes) ... (40)
2. Jitter buffer (usec) ... (3000)
Attachment circuit
3. E1 port number ... (1)
4. Bundle time slot > (1-10,20-30)
>
Please select item <1 to 4>
ESC-previous menu; !-main menu; &-exit
Figure 4-82. TDM Pseudowire Service Parameters Menu
Table 4-74. TDM Pseudowire Service Parameters
Parameter Description Possible Values
PW number Displays the PW number as defined in the
PW menu (read-only) See
Table 4-69
PW name Displays the PW name as defined in the PW
menu (read-only) See Table 4-69
PW type Displays the PW type as defined in the PW
General Parameters menu (read-only) See
Table 4-70
Payload size
(frames in packet)
/
Payload size
(32 bytes in packet) The occurrence of TDM frames (bundles)
within the packet.
When configuring Basic CES PSN, the
payload size is set in terms of the amount
of frames (structures/bundles) per the
corresponding packet.
When configuring SAToP, the payload size is
set in terms of 32 bytes per the
corresponding packet.
2–256 for Basic CES PSN
2–16 for SAToP
Payload size (bytes) Displays the TDM payload size in bytes
(read-only). The payload size is
automatically calculated as follows:
• For Basic CES PSN – the payload size
(frames in packet) is doubled by the
number of timeslots in the bundle.
• For SAToP – the payload size is doubled
by 32 bytes.
34–512 for CES over PSN