Ace ACE-3205, Инструкция по установке и эксплуатации

Страница: 218 / 418

Chapter 4 Configuration Installation and Operation Manual
4-128 Additional Tasks and Options ACE-3105, ACE-3205 Ver. 5.2
Parameter Description Possible Values
Main version The main application version, which may not
necessarily be the currently active one.
Note: The main version is read at power-up from
the DiskOnChip main version header file and after
software download to main version.
Alphanumeric
version number with
the version's date
and time (read-only)
Backup version The backup application version, for rare cases
when the main version is corrupted.
Note: The backup version is read at power-up from
the DiskOnChip main version header file, or after
downloading the backup software version.
Alphanumeric
version number with
the version's date
and time (read-only)
Storage free
(bytes) Free space left on the ACE-3105, ACE-3205
internal flash disk 0–99999999
Swapping Application Files
The current application files can be swapped with the backup files when
necessary.
³
To swap between the main and backup application files:
1. From the Dir menu (Utilities> File Utilities> File System> Dir), select Swap
application files.
A confirmation message appears:
Are you sure (Y/N)?
2. Type Y to confirm the files swap.
ACE-3105, ACE-3205 continues to run with the previous files version until
you manually reset the unit (see
Restarting the Unit
).
Requirements for TFTP/XMODEM File Transfer Operations
The following information applies to XMODEM and TFTP file transfer operations
that are available/selectable from either the boot menu or the standard
management menus. For more information about the boot operations, refer to
Appendix B .
From time to time, various file transferring operations, such as preset
configuration download/upload, license or user file download/upload may be
necessary. You may want to share the unit's configuration with other units,
download new software into the unit, obtain a new boot code, or use file
transferring for other purposes.
All file transfer operations are performed via the XMODEM or TFTP protocols, and
require a protocol-compatible application that must be installed on the
computer/server with which ACE-3105, ACE-3205 communicates. For example, if
you connect ACE-3105, ACE-3205 to a laptop, the laptop requires an application
that allows communication and file transfers via the selected protocol.
Accordingly:
Note