Ace ACE-3205, Инструкция по установке и эксплуатации

Страница: 98 / 418

Chapter 4 Configuration Installation and Operation Manual
4-8 Configuring for Management ACE-3105, ACE-3205 Ver. 5.2
Parameter Description Possible Values
SNMPv3 engine
ID Submenu for configuring the
SNMPv3 engine Refer to
Configuring the
SNMPv3 Parameters
SNMPv3 settings Submenu for configuring the
SNMPv3 parameters; available
only if the SNMPv3 functionality
is enabled (see above) Refer to Configuring the
SNMPv3 Parameters
Read
community String that defines the read
community Up to 20 alphanumeric
characters, case-sensitive
Default: Public
Write
community String that defines the write
community Up to 20 alphanumeric
characters, case-sensitive
Default: Public
Trap
community String that defines the trap
community Up to 20 alphanumeric
characters, case-sensitive
Default: Public
Viewing Device Information
The ACE-3105, ACE-3205 management software allows you to assign a name to
the unit, specify its location to distinguish it from the other devices installed in
your system and assign a contact person.
³
To access the Device Information menu:
• From the Management menu (see Figure 4-7 ), select Device Information.
The following information screen is displayed.
ACE-3205 – RAD Data Communications
Configuration> System> Management> Device Information
Description ... (ACE-3205 HW Version: 10-A\0-A, SW Version: 5.20B1)
1. Contact ... (Name of contact person)
2. Name ... (ACE-3205)
3. Location ... (The location of this device)
>
Please select item <1 to 3>
ESC-previous menu; !-main menu; &-exit
Figure 4-8. Device Information Menu