Ace ACE-3205, Инструкция по установке и эксплуатации

Страница: 74 / 418

Chapter 3 Operation Installation and Operation Manual
3-4 Configuration Alternatives ACE-3105, ACE-3205 Ver. 5.2
3.4 Configuration Alternatives
ACE-3105, ACE-3205 can be managed and configured using the following user
interface alternatives:
• Working with an ASCII-based Control Terminal
• Working with ConfiguRAD
• Working with RADview-EMS.
Working with an ASCII-based Control Terminal
Any standard ASCII terminal or a PC station (running a terminal emulation
application), which is equipped with a V.24/RS-232 communication interface, can
be used to set up and configure ACE-3105, ACE-3205. You can connect the
terminal/station directly to the unit's control port for establishing out-of-band
management.
The terminal screens interface (see
Figure 3-8
) however, can also be used for
inband management (for example, via Telnet).
³
To set up terminal control:
1. Make sure that all the cables are properly connected (for more information,
refer to
Chapter 2
).
2. Turn on the control terminal or start the PC terminal emulation (in
Windows XP: click Start> All Programs> Accessories> Communications>
HyperTerminal to create a new terminal connection.
The Connection Description dialog box is displayed.
Figure 3-3. HyperTerminal, Connection Description Dialog Box
3. Enter description for the terminal connection.
4. Select an icon to represent the terminal connection.
The Connect To dialog box is displayed.