Ace ACE-3205, Инструкция по установке и эксплуатации

Страница: 152 / 418

Chapter 4 Configuration Installation and Operation Manual
4-62 Configuring for Operation ACE-3105, ACE-3205 Ver. 5.2
Parameter Description Possible Values
Signaling VCI The VCI that should be used when
creating the XC for signaling traffic
Note: Available only after the port
number has been assigned to the E1
port.
33–65535
32 is reserved for internal
use
Read-only
Signaling multiplexed
frame size Size of the multiplexed signaling
frame 100–1480
Default: 500
Signaling TX interval length of the TX interval for signaling
traffic, in milliseconds 4–200
Default: 20
Voice VPI The VPI that should be used when
creating the XC for voice traffic
Note: Available only after the port
number has been assigned to the E1
port
.
0–5
Voice VCI The VCI that should be used when
creating the XC for voice traffic
Note: Cannot be changed while an XC
with the same VPI/VCI is configured for
the Abis port.
33–65535
(32 is reserved for internal
use)
Voice multiplexed
frame size Size of the multiplexed voice
frame 100–1480
Default: 500
Voice TX interval length of the TX interval for voice
traffic, in milliseconds 20–200
Default: 20
Data VPI
The VPI that should be used when
creating the XC for data traffic
Note: Available only after the port
number has been assigned to the E1
port.
0–5
Data VCI
The VCI that should be used when
creating the XC for data traffic
Note: Cannot be changed while an XC
with the same VPI/VCI is configured for
the Abis port.
33–65535
(32 is reserved for internal
use)
Data multiplexed
frame size Size of the multiplexed data
frame 100–1480
Default: 500
Data TX interval length of the TX interval for data
traffic, in milliseconds 20–200
Default: 20
Timeslot Configure the timeslot for the displayed
Abis port See
Configuring the Time
Slot
Statistics Shows the Abis performance
statistics of the Abis port See
Monitoring the Logical
Layer in Chapter 6